Air King PWC10R 10-Inch Round Professional Hood Wall Cap

Air King PWC10R - Comes with a 1-year limited warranty. Air king prc10r 22 gauge galvanized steel range hood wall cap with backdraft damper efficiently exhausts air from the home using 6" round ducting. Professional hood wall cap matched to your system's needs. Includes a built in back draft damper. Has a 10-inch diameter. Made of galvanized steel.

More information about Air King PWC10R

Hydrofarm Active Air Stainless Steel Duct Clamps, 10" Pack of 2

Hydrofarm ACC10 - Classic "hose clamp" design. Worm drive adjustable w/screwdriver. Worm drive is adjustable with screwdriver for secure fit. Rust resistant. Stainless Steel. 10-inch. Duct clamp. Worm drive adjustable w/screwdriver for a super-secure fit. Two clamps per pack. Secures ducting tightly in place. Stainless steel and rust resistant.

Made of stainless steel and is rust resistant. Two clamps per pack.

More information about Hydrofarm ACC10


Similar products:


Speedi-Products SM-30A90 10 10-Inch 30-Gauge 90-Degree Round Adjustable Elbow

Applied Applications International SM-30A90 10 - Classic "hose clamp" design. Stainless Steel. For turns through 90 degrees and are simple to adjust. Secures ducting tightly in place. Speedi-products 10-inch sheet metal 30-Gauge adjustable elbows are used in HVAC round pipe and flexible Warm air duct systems. Stainless steel and rust resistant. Worm drive adjustable w/screwdriver.

Worm drive is adjustable with screwdriver for secure fit. Used in hvac round pipe and flexible Warm air duct systems. Can be used for remodeling, Do it yourself and New Residential projects. Crimped on one end for easy fit into a pipe or fitting of the same diameter. Seal joints with approved duct mastic sealants.

Speedi-Products SM-30A90 10 10-Inch 30-Gauge 90-Degree Round Adjustable Elbow - Insulate Ductwork for improved energy efficiency and comfort. 10-inch sheet metal 30 Gauge adjustable elbows. Duct clamp. Two clamps per pack. 10-inch. Rust resistant.

More information about Applied Applications International SM-30A90 10


Similar products:


Builder's Best 110412 Semi-Rigid Aluminum Duct with 10" Dia, 8'

Builder's Best 110412 - 10-inch. The 10 in. Worm drive adjustable w/screwdriver. Stainless steel and rust resistant. Maximum operating temperature is 430deg F. Semi-rigid Aluminum Duct is noninsulated. Used in hvac round pipe and flexible Warm air duct systems. Plain-ended pipe. Worm drive is adjustable with screwdriver for secure fit. Builder's best is a nationwide, high-performance manufacturer of quality venting solutions, designed to meet specific constraints of areas such as dryer venting, bathroom fan venting, fresh-air ventilation and general venting.

. Classic "hose clamp" design. 10 inch x 8Ft. Seal joints with approved duct mastic sealants. Stainless Steel. X 8 ft. For turns through 90 degrees and are simple to adjust. It is ideal for general-purpose venting such as range hood and bath fan exhaust. Insulate Ductwork for improved energy efficiency and comfort. Class 0 metal duct.

Builder's Best 110412 Semi-Rigid Aluminum Duct with 10" Dia, 8' - Duct clamp. 10-inch sheet metal 30 Gauge adjustable elbows.

More information about Builder's Best 110412


Similar products:


iPower 10 Inch 25 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, 2 Clamps included

iPower Grow Light GLDUCT10X25C - Ipower ventilation ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Flexible length for exhaust fan blower / inline fan. Benefits of ipower ducting: This 10-inch ducting fits any standard 10-inch inline fan. This air duct is easy to cut using a pair of metal snips or a standard wire cutter.

Each ducting unit includes a pair of metal clamps made from stainless steel. Ipower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. 10-inch sheet metal 30 Gauge adjustable elbows. For turns through 90 degrees and are simple to adjust. In addition to hps/mh and ceramic MH technology, fluorescent, we offer digital ballasts, and LED lighting systems.

iPower 10 Inch 25 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, 2 Clamps included - From hobbyist to commercial applications, climate control, irrigation, we offer a broad spectrum of gardening tools and equipment in hydroponics, and structures to help your garden thrive. Two clamps per pack. This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.

Secures ducting tightly in place. Worm drive adjustable w/screwdriver. This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.

More information about iPower Grow Light GLDUCT10X25C


Similar products:


Speedi-Products SM-2860GR 10 10-Inch Diameter by 60-Inch Length 28-Gauge Galvanized Sheet Metal Pipe

Applied Applications International SM-2860GR 10 - Stainless steel and rust resistant. 10 inch x 8Ft. Noncombustible corrugated aluminum with watertight continuous lock seams. Classic "hose clamp" design. Class 0 metal duct. Stainless Steel. Used in hvac warm air supply, return and exhaust duct systems. Worm drive is adjustable with screwdriver for secure fit. Two clamps per pack.

Crimped end for easy installation into additional pipe or fittings. 10-inch sheet Metal 28 gauge round pipe. Insulate Ductwork for improved energy efficiency and comfort. Fire proof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.

Speedi-Products SM-2860GR 10 10-Inch Diameter by 60-Inch Length 28-Gauge Galvanized Sheet Metal Pipe - Seal joints with approved duct mastic sealants. Thermal endurance: temperature endurance range from 0 ~ 185°F. 18℃ ~ 85℃. Speedi-products 10-inch Sheet Metal 28-Gauge Round Pipe. Worm drive adjustable w/screwdriver. Ducting size: 10 inches diameter x 25 feet length when fully extended. Non insulated general-purpose venting duct for low & Medium operating pressures.

More information about Applied Applications International SM-2860GR 10


Similar products:


Ideal-Air 904180 Flex Ducting, 10" x 25', Silver

iPower Distributor L&G 904180 - Non insulated general-purpose venting duct for low & Medium operating pressures. Flexible length for exhaust fan blower / inline fan. Plain-ended pipe. Noncombustible corrugated aluminum with watertight continuous lock seams. These class 1 aluminum flexible air ducts are made from tough, puncture resistant 3 ply aluminum foil laminate and contain a high density, corrosion resistant wire helix in the duct wall for support.

Also can be used in various heating, ventilating or ehausting applications. Contains very high density. Insulate Ductwork for improved energy efficiency and comfort. Rust resistant. Worm drive adjustable w/screwdriver. Also can be used in various heating, ventilating or exhausting applications. Worm drive is adjustable with screwdriver for secure fit.

Ideal-Air 904180 Flex Ducting, 10" x 25', Silver - Two clamps per pack. 10 inch x 8Ft. Used in hvac round pipe and flexible Warm air duct systems. Wide applications: kitchens, Grow Tents, Bathrooms, Grow Rooms, Greenhouses, etc. Easy installation: free pair of 10 inch metal clamps made from stainless steel.

More information about iPower Distributor L&G 904180


Similar products:


Broan MD10TU Motorized Universal Make-Up Air Damper with Pressure Sensor Kit, 10"

Broan MD10TU - Wide applications: kitchens, Grow Tents, Bathrooms, Greenhouses, Grow Rooms, etc. Easy installation: free pair of 10 inch metal clamps made from stainless steel. Used in hvac round pipe and flexible Warm air duct systems. Consult your local building codes for approved installation practices. Broan direct wire make-up air dampers, when interlocked with slave dampers, open in unison to provide synchronized operation for kitchen, bath and whole house ventilation products.

Class 0 metal duct. Providing make-up air for exhaust devices is easy, controlling it is not - until now. Flexible length for exhaust fan blower / inline fan. Slave dampers md6s, md8s or md10s are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation.

Broan MD10TU Motorized Universal Make-Up Air Damper with Pressure Sensor Kit, 10" - Classic "hose clamp" design. Worm drive adjustable w/screwdriver. 10-inch sheet metal 30 Gauge adjustable elbows. Plain-ended pipe. Fire proof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.

Seal joints with approved duct mastic sealants. 10-inch sheet Metal 28 gauge round pipe.

More information about Broan MD10TU


Similar products:


Ideal-Air 736422 Duct Coupler, 10"

iPower Distributor L&G 736422 - Fire proof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance. 10-inch. Crimped on both ends with strengthening bead for secure connection. Insulate Ductwork for improved energy efficiency and comfort.

10-inch sheet metal 30 Gauge adjustable elbows. Interlocked make-up air dampers provide make-up air when called for to keep the home comfortable by allowing the range hood to operate at optimum levels. Used in hvac round pipe and flexible Warm air duct systems. Slave dampers md6s, md8s or md10s are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation.

Ideal-Air 736422 Duct Coupler, 10" - Plain-ended pipe. Rust resistant. For turns through 90 degrees and are simple to adjust. Fast and easy way for connecting flex ducting. Made from galvanized steel. Stainless steel and rust resistant. Also can be used in various heating, ventilating or ehausting applications. Classic "hose clamp" design.

More information about iPower Distributor L&G 736422


Similar products:


Nutone 423 Broan Vertical Transition 4-1/2 inch x 18-1/2 inch To 10 inch Round

Lumtopia 423 - Thermal endurance: temperature endurance range from 0 ~ 185°F. 18℃ ~ 85℃. Broan 423 10 inch round duct vertical transition galvanized steel allows for quick transition to easy-to-obtain-and-install round ducting 4-1/2 inch x 18-1/2 inch to 10 inch round Stainless steel and rust resistant. Consult your local building codes for approved installation practices.

Non insulated general-purpose venting duct for low & Medium operating pressures. For turns through 90 degrees and are simple to adjust. Ducting size: 10 inches diameter x 25 feet length when fully extended. Manufactured in United States. Secures ducting tightly in place. Duct clamp. Worm drive is adjustable with screwdriver for secure fit.

Nutone 423 Broan Vertical Transition 4-1/2 inch x 18-1/2 inch To 10 inch Round - Duct diameter: 10 Flexible length for exhaust fan blower / inline fan. Both ends has secure connection. Seal joints with approved duct mastic sealants. Wide applications: kitchens, Grow Rooms, Grow Tents, Greenhouses, Bathrooms, etc. Easy installation: free pair of 10 inch metal clamps made from stainless steel.

More information about Lumtopia 423


Similar products:


Broan L400 High Capacity Commercial Grade Ventilation Fan

Broan L400 - Slave dampers md6s, md8s or md10s are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation. Fire proof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.

Ducting size: 10 inches diameter x 25 feet length when fully extended. Two impact resistant centrifugal blower wheels and quiet automatic backdraft dampers. Wide applications: kitchens, Grow Rooms, Grow Tents, Greenhouses, Bathrooms, etc. Easy installation: free pair of 10 inch metal clamps made from stainless steel.

Broan L400 High Capacity Commercial Grade Ventilation Fan - Operating at just 2. 3 sones, this fan is as quiet as a normal conversation. Seal joints with approved duct mastic sealants. Contains very high density. Insulate Ductwork for improved energy efficiency and comfort. Rated at 434 cfm, this fan is no weakling. Non insulated general-purpose venting duct for low & Medium operating pressures.

Duct clamp. The duct contains coorosion resistant wire helix.

More information about Broan L400


Similar products: