Extech 445815 Humidity Meter with Alarm and Remote Probe

Extech Instruments 445815 - Has a built-in stand for sitting on a desk but can also be mounted to a wall with included bracket. Remote probe extends 18 in. Comes complete with built-in stand, wall mount bracket, and 2 AAA batteries. For measuring behind walls. Built-in stand for sitting on a desk or mount on a wall using included bracket.

Recalls minimum and maximum readings. A visual and audible alarm warns when the humidity level goes above or below the adjustable set point. Key features large, with adjustable set points, wall mount bracket, temperature and dew point %rh audible and visual alarms, easy-to-read triple lcd displays % relative Humidity, alert when humidity exceeds set limit Probe clips onto meter or extends on 18" 457mm cable Max/Min with Reset function Rear calibration adjustment pot for Humidity and Temperature Complete with built-in stand, remote sensor and 2 AAA batteries Specifications Humidity: 10 to 99% Temperature: 14 to 140°F -10 to 60°C Basic Accuracy: ±4%RH; ±1.

Extech 445815 Humidity Meter with Alarm and Remote Probe - 8°f/1°c dimensions: 4. 3" x 3. 9" x 078" 109 x 99 x 20mm weight: 6oz 169g Large triple display of relative humidity, temperature and dew point. Alarm with programmable set point gives visual and audible warning when humidity level exceeds high or low limit. Ideal for use in humid areas where mold can become a problem.

More information about Extech Instruments 445815

Extech RH300-CAL Humidity Calibration Kit

Extech Instruments RH300-CAL - 33% rh salt bottle calibration standard FOR 37803-12. Bottle designed with small opening for snug fit of the sensor probe. 33% and 75% relative humidity bottles. Optional calibration kit for calibrating extech humidity meters. Keep your hygrometer/thermohygrometer working at its best with these parts and accessories.

More information about Extech Instruments RH300-CAL


Similar products:


Standard Small - Boveda One-Step Hygrometer Calibration Kit - 75% RH

Humidi-Pak CAL75-SM - Excellent way to calibrate your hygrometer and measure the humidity of your humidor. Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. If your hygrometer reads above or below 75%, adjust the calibration by the number of percentage points it is off from 75%. Completely maintenance free - no activation required.

Optional calibration kit for calibrating extech humidity meters. The one-step calibration Kit utilizes Boveda's 75. 5% relative humidity standard, which is widely used and accepted by chemists and lab professionals to determine the accuracy of any hygrometer also known as the \"salt test\". Easy to use. Exterior bag dimensions: 5.

Standard Small - Boveda One-Step Hygrometer Calibration Kit - 75% RH - 5" x 7" interior bag Dimensions: Approx 4" x 4. 5". 33% and 75% relative humidity bottles. Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. Shelf life before opening is a minimum of 2 years. Produces an environment of 75-percent humidity. The boveda one-step calibration Kit is a simple and surefire method to accurately calibrate any digital or analog hygrometer or humidity sensor.

More information about Humidi-Pak CAL75-SM


Similar products:


Extech 445715 Big Digit Hygro-Thermometer

Extech Instruments 445715 - Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. Bottle designed with small opening for snug fit of the sensor probe. Rh accuracy: ±4%RH. Easy to use. Exterior bag dimensions: 5. 5" x 7" interior bag Dimensions: Approx 4" x 4. 5". Humidity range: 10 to 99% RH. Designed to monitor relative humidity, and temperature.

If your hygrometer reads above or below 75%, adjust the calibration by the number of percentage points it is off from 75%. Completely maintenance free - no activation required. Lasts approximately one year, good for multiple calibrations. Product color is very dark green and white. Max/min with reset function.

Extech 445715 Big Digit Hygro-Thermometer - Temperature accuracy: ±1. 8°f, ±1°c temperature range: 14 to 140°F -10 to 60°C. 1 inch digits on super large LCD Max/Min with ''reset'' function. A perfectly-calibrated hygrometer will read 75% RH. Shelf life before opening is a minimum of 2 years. Produces an environment of 75-percent humidity.

More information about Extech Instruments 445715


Similar products:


Boveda 32% Low-RH One-Step Hygrometer Calibration Kit - Standard Small

Boveda CAL32-SM - Product color is very dark green and white. Lasts approximately one year, good for multiple calibrations. Excellent way to calibrate your hygrometer and measure the humidity of your humidor. If your hygrometer reads above or below 32%, close the zipper, adjust the calibration by the number of percentage points it is off from 32%.

Completely maintenance free - no activation required. Bottle designed with small opening for snug fit of the sensor probe. One of those principles is that a saturated solution of salt in water will maintain a constant level of relative humidity inside an enclosed chamber. This is why boveda should be used to establish the correct level of humidity inside your container, package or humidor, or to check the accuracy of your hygrometer.

Boveda 32% Low-RH One-Step Hygrometer Calibration Kit - Standard Small - If your hygrometer reads above or below 75%, adjust the calibration by the number of percentage points it is off from 75%. Completely maintenance free - no activation required. Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. Humidity: 10 to 99% RH. Easy to use. Exterior bag dimensions: 5.

5" x 7" interior bag Dimensions: Approx 4" x 4.

More information about Boveda CAL32-SM


Similar products:


AcuRite 01083 Pro Accuracy Indoor Temperature and Humidity Monitor

AcuRite 01083M - Product color is very dark green and white. This temperature sensor and humidity gauge combination offers enhanced accuracy, and frequent measurement updates on an easy-to-read digital display. Lasts approximately one year, good for multiple calibrations. Tabletop, wall-mountable, and magnet-mountable design.

Measures conditions every 10 seconds. If your hygrometer reads above or below 75%, adjust the calibration by the number of percentage points it is off from 75%. Completely maintenance free - no activation required. Bottle designed with small opening for snug fit of the sensor probe. 33% and 75% relative humidity bottles.

AcuRite 01083 Pro Accuracy Indoor Temperature and Humidity Monitor - Professional accuracy: +/- 05°f, +/- 2% rh with manual calibration option. One-year limited warranty. Complete with built-in stand, sensor, mounting bracket, and 1 AAA battery; optional calibration salt bottles. Now you can perform a high and low-RH calibration for your hygrometers. Simply place your hygrometer inside the bag, and wait 24 hours.

With an acurite pro accuracy indoor temperature and Humidity Monitor, you get reliable information that can help you ensure a comfortable living space, and better air quality, all while taking steps to preserve your home's interior and valuable possessions. Shelf life before opening the pack is a minimum of 2 years.

More information about AcuRite 01083M


Similar products:


Extech 445703 Big Digit Hygro-Thermometer with Min/Max

Extech Instruments 445703 - Accuracy is ±5%RH and ±1. 8°f/±1°c. Complete with built-in stand, mounting bracket, sensor, and 1 AAA battery; optional calibration salt bottles. Now you can perform a high and low-RH calibration for your hygrometers. Simply place your hygrometer inside the bag, and wait 24 hours. Shelf life before opening the pack is a minimum of 2 years.

Measures indoor temperature and humidity from -4 to 158°F -20 to 70°C and 1-99% RH. Tabletop, wall-mountable, and magnet-mountable design. Accuracy: ±4%rh; ±1°c/1. 8°f. Shelf life before opening is a minimum of 2 years. Produces an environment of 75-percent humidity. A perfectly-calibrated hygrometer will read 75% RH.

Extech 445703 Big Digit Hygro-Thermometer with Min/Max - Humidity: 10 to 99% RH. Desktop or Wall Mount. Temperature: 14 to 140 degrees F -10 to 60 degrees C. Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. Lasts approximately one year, good for multiple calibrations. Digits on a super large LCD.

More information about Extech Instruments 445703


Similar products:


ERAY Psychrometer Hygrometer Thermometer Digital Handheld Temperature and Humidity Meter Gauge Monitor Indoor with Dew Point and Wet Bulb Temperature Measure, Battery Included

ERAY SR-Y86 - Easy to use. Exterior bag dimensions: 5. 5" x 7" interior bag Dimensions: Approx 4" x 4. 5". Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. 33% and 75% relative humidity bottles. Displays high and low records for past 24 hours and for all-time. Easy to use. Exterior bag dimensions: 5.

5" x 7" interior bag Dimensions: Approx 4" x 4. 5". Lasts approximately one year, good for multiple calibrations. 2-in-1: it is designed to combine the functions of humidity meter, temperature meter, wet bulb temperature and dew point temperature. Temperature: 14 to 140°F -10 to 60°C. Shelf life before opening is a minimum of 2 years.

Produces an environment of 75-percent humidity. Lcd brighter in the darker places. Dual display: temperature range: -30 °c~60 °c -22 °f~140 °f; humidity range: 0~100%rh; dew point temperature range: -50 °c~60 °C -58 °F~140 °F; Wet bulb temperature range: -50 °C~60 °C -58 °F~140 °F. A perfectly-calibrated hygrometer will read 32% RH.

ERAY Psychrometer Hygrometer Thermometer Digital Handheld Temperature and Humidity Meter Gauge Monitor Indoor with Dew Point and Wet Bulb Temperature Measure, Battery Included - Multifunctional: unit and mode conversion °c, dewpoint and wet bulb, °F, Max Hold and Min Hold Function; Auto shutdown without operation after 15 minutes; 6F22 9V Battery included. Widely used: used for hvac, paranormal investigator, daily life, machine room, industry, medical, agriculture, meteorology, in wine cellar, building engineer, data storeroom and etc.

More information about ERAY SR-Y86


Similar products:


Rubber Sheet, Heavy Duty, High Grade 60A, Neoprene Black, 12x12-Inch by 1/8 +/- 5% for Plumbing, Gaskets DIY Material, Supports, Leveling, Sealing, Bumpers, Protection, Abrasion, Flooring

EverestRubberCompany - Multi-purposes 12 x 12 x 1/8 in. Measures conditions every 10 seconds. Temperature: 14 to 140 degrees F -10 to 60 degrees C. Tabletop, wall-mountable, and magnet-mountable design. Multifunctional: unit and mode conversion °c, dewpoint and wet bulb, °F, Max Hold and Min Hold Function; Auto shutdown without operation after 15 minutes; 6F22 9V Battery included.

Widely used: used for hvac, building engineer, paranormal investigator, industry, in wine cellar, agriculture, meteorology, daily life, medical, machine room, data storeroom and etc. Rubber sheet - includes 1 black sheet of rubber 12 in x 12 in by 1/8 in. Lcd brighter in the darker places. Dual display: temperature range: -30 °c~60 °c -22 °f~140 °f; humidity range: 0~100%rh; dew point temperature range: -50 °c~60 °C -58 °F~140 °F; Wet bulb temperature range: -50 °C~60 °C -58 °F~140 °F.

Rubber Sheet, Heavy Duty, High Grade 60A, Neoprene Black, 12x12-Inch by 1/8 +/- 5% for Plumbing, Gaskets DIY Material, Supports, Leveling, Sealing, Bumpers, Protection, Abrasion, Flooring - Gaskets - build different shapes of gaskets for plumbing, mechanics, industrial applications. If your hygrometer reads above or below 75%, adjust the calibration by the number of percentage points it is off from 75%. Completely maintenance free - no activation required. Shelf life before opening is a minimum of 2 years.

Produces an environment of 75-percent humidity. Professional accuracy: +/- 0

More information about EverestRubberCompany


Similar products:


Extech RH300 Humidity Meter with Dew Point

Extech Instruments RH300 - Heavy duty/high quality rubber material:This rubber is dried using a special process. Shelf life before opening the pack is a minimum of 2 years. Measures indoor temperature and humidity from -4 to 158°F -20 to 70°C and 1-99% RH. Bottle designed with small opening for snug fit of the sensor probe. Displays high and low records for past 24 hours and for all-time.

Rh accuracy: ±3% RH. Lasts approximately one year, good for multiple calibrations. Compact meter is ideal for field applications - it displays relative humidity and temperature simultaneously, and dew point or wet bulb or probe temperature on a large LCD. Possible applications:Use Rubber Sheet for projects like, gasket creation, vibration.

Extech RH300 Humidity Meter with Dew Point - Measures conditions every 10 seconds. Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. Easy to use. Exterior bag dimensions: 5. 5" x 7" interior bag Dimensions: Approx 4" x 4. 5". Optional thermistor probe lets you calculate T1 - T2 Optional calibration kit for calibrating extech humidity meters.

More information about Extech Instruments RH300


Similar products:


AcuRite 00613 Humidity Monitor with Indoor Thermometer, Digital Hygrometer and Humidity Gauge Indicator

Chaney Instruments 00613B - It's more than accurate, it's AcuRite. Indoor thermometer displays temperature in Fahrenheit or Celsius. If your hygrometer reads above or below 75%, adjust the calibration by the number of percentage points it is off from 75%. Completely maintenance free - no activation required. Measures conditions every 10 seconds.

Battery: aAA Battery 2. Featuring a precision indoor thermometer and hygrometer, it shows current indoor humidity and temperature, and an easy-to-read LCD display, plus daily high and low records. Includes limited 1-year warranty; Knowledgeable US-based customer service team. Accuracy: ±4%rh; ±1°c/1. 8°f.

AcuRite 00613 Humidity Monitor with Indoor Thermometer, Digital Hygrometer and Humidity Gauge Indicator - Optional calibration kit for calibrating extech humidity meters. Heavy duty/high quality rubber material:This rubber is dried using a special process. Humidity: 10 to 99% RH. Indoor temperature range: 32 to 122 degrees Fahrenheit; 0 to 50 degrees Celsius. Possible applications:Use Rubber Sheet for projects like, gasket creation, vibration.

Shelf life before opening is a minimum of 2 years. Produces an environment of 75-percent humidity.

More information about Chaney Instruments 00613B


Similar products: