iLIVING ILG8SF16V Wall-Mounted Variable Speed Shutter Exhaust Fan, 16″

iLIVING USA ILG8SF16V - 16 inch variable speed shutter exhaust fan with automatic Shutters. For variable speed models, the iLIVING ILG8SFSC Speed controller is sold separately. The shutter fan comes in 8 different sizes: 10 inch, 20 inch, 12 inch, 18 inch, 24 inch, 16 inch, 30 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model.

The iliving shutter exhaust fan is perfect for removing excess heat, warehouses, factories, moisture, barns, including restaurants, and unpleasant odors from virtually any commercial location, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan.

iLIVING ILG8SF16V Wall-Mounted Variable Speed Shutter Exhaust Fan, 16" - The fan comes fully assembled out of the box; only installation required is the electrical hardwire. Corrosion-resistant with OSHA compliant wire guards. Variable speed functionality with the purchase of the iLIVING ILG8SFSC speed controller. The completely enclosed motor is thermally protected and permanently lubricated.

Ul listed with speed controllable, permanently lubricated motor. The iliving 30 inch and 36 inch shutter fans are only available in single Speed. 120 volts, 1550 rpm, 1/20 hp, 0.85 amp, 1280 CFM.

More information about iLIVING USA ILG8SF16V

Ventamatic XXFIRESTAT 10-Amp Adjustable Thermostat with Firestat for Power Attic Ventilators

Ventamatic XXFIRESTAT - Temperature range F 183, Accessory Type Ventilation accessory. Temperature range from 50 degrees to 120 degrees Fahrenheit. Temperature is fan On/Off. Provides energy-efficient operation of power attic ventilators. Adjustable bi-metallic switch. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps.

This ventamatic replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. 10-amp adjustable thermostat.

More information about Ventamatic XXFIRESTAT


Similar products:


KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K177-1005

KB Electronics 8811012 - Temperature is fan On/Off. 5. 0 max amps 115 volts; UL & CSA Approved. Provides energy-efficient operation of power attic ventilators. Not to be used with Capacitor Start or Capacitor Run Motors. 10-amp adjustable thermostat. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor.

. Adjustable bi-metallic switch. Controls that have been installed are not returnable. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft direct drive to cool motor. Control provides infinite variable speed for shaded pole and PSC motors.

KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K177-1005 - Temperature range from 50 degrees to 120 degrees Fahrenheit. Not to be used with gear motors. Designed for standard 2" x 4" Electrical Wall Box. Applications: fans, humidifiers, blowers, Attic Fans, Fireplace Blowers, Ventilators.

More information about KB Electronics 8811012


Similar products:


iLIVING ILG8SFSC Solid State Variable Adjustable Precision Fan Speed Controller 120V 8A

iLIVING USA ILG8SFSC - Brushed aluminum switch plate and screws included. 120v, 8a; ul listed. Provides energy-efficient operation of power attic ventilators. 5. 0 max amps 115 volts; UL & CSA Approved. This is an oem part intended for use with iLIVING shutter fans. The iliving solid state adjustable speed controller is engineered and designed specifically for use with the iLIVING line of variable speed shutter exhaust fans and other compatible speed controllable ventilators or fans.

Fits standard single Gang box. Ul listed. Temperature is fan On/Off. 120 volts, 8 amps. Not to be used with Capacitor Start or Capacitor Run Motors. Temperature range from 50 degrees to 120 degrees Fahrenheit. Adjustable bi-metallic switch. Applications: fans, blowers, Humidifiers, Attic Fans, Fireplace Blowers, Ventilators.

iLIVING ILG8SFSC Solid State Variable Adjustable Precision Fan Speed Controller 120V 8A - Precision fan speed controller. This precision controller provides adjustable speed operation at any point between minimum and maximum fan speeds. Rotary Type with on/off function.

More information about iLIVING USA ILG8SFSC


Similar products:


Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators

Ventamatic XXDUOSTAT - 5. 0 max amps 115 volts; UL & CSA Approved. Humidity range from 30 to 90 percent. This is an oem part intended for use with iLIVING shutter fans. Designed for standard 2" x 4" Electrical Wall Box. Not to be used with Capacitor Start or Capacitor Run Motors. Provides energy efficient operation of power attic ventilators.

Remove excess heat from an attic in summer and humidity in winter. Temperature is fan On/Off. Adjustable temperature range from 50 degrees to 120 degrees Fahrenheit. Year-round control removes excess humidity and protects roofing components Controls up to three units, not to exceed 10 amps Provides energy-efficient operation of power attic ventilators.

Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators - Rotary Type with on/off function. This ventamatic dual temp/humidity Control helps power attic ventilators equalize inside and outside attic temperatures to remove excess heat from your attic in summer and humidity in winter. Temperature range from 50 degrees to 120 degrees Fahrenheit. Fits standard single Gang box.

. Brushed aluminum switch plate and screws included. 120v, 8a; ul listed.

More information about Ventamatic XXDUOSTAT


Similar products:


Peco TF115-001 NEMA 4X Line Voltage Thermostat, Gray

Peco TF115-001 - Provides energy-efficient operation of power attic ventilators. One control for Heating and/or Cooling. Adjustable bi-metallic switch. 5. 0 max amps 115 volts; UL & CSA Approved. Not to be used with Capacitor Start or Capacitor Run Motors. Rugged, Weather Resistant Enclosure. 10-amp adjustable thermostat. 120v, 8a; ul listed.

Multi-positional Mounting Offers Flexibility in New or Existing Installations. Temperature range from 50 degrees to 120 degrees Fahrenheit. Designed for standard 2" x 4" Electrical Wall Box. The t115 is suitable for use in animal confinement environments as well as factories, warehouses, garages and gymnasiums.

Peco TF115-001 NEMA 4X Line Voltage Thermostat, Gray - Humidity range from 30 to 90 percent. Fits standard single Gang box. Provides energy efficient operation of power attic ventilators. Brushed aluminum switch plate and screws included. Allows equalization of inside and outside attic temperatures. Applications: fans, humidifiers, blowers, Attic Fans, Fireplace Blowers, Ventilators.

Precision fan speed controller.

More information about Peco TF115-001


Similar products:


KB Electronics 8811006 Solid State Variable Speed AC Electric Motor Control, 2.5 Max amp, 115V, # K177-1002

KB Electronics 8811006 - Allows equalization of inside and outside attic temperatures. One control for Heating and/or Cooling. Provides energy efficient operation of power attic ventilators. Control provides infinite variable speed for shaded pole and PSC motors. 120v, 8a; ul listed. Adjustable bi-metallic switch. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor.

Fits standard single Gang box. Multi-positional Mounting Offers Flexibility in New or Existing Installations. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft direct drive to cool motor. Rotary Type with on/off function.

KB Electronics 8811006 Solid State Variable Speed AC Electric Motor Control, 2.5 Max amp, 115V, # K177-1002 - 2. 5 max amps 115 volts; UL & CSA Approved. Remove excess heat from an attic in summer and humidity in winter. Temperature is fan On/Off. This is an oem part intended for use with iLIVING shutter fans. 10-amp adjustable thermostat.

More information about KB Electronics 8811006


Similar products:


Motorized Exhaust/Intake Shutter Kit 16"

ACER Trading Group AS12 - This is an oem part intended for use with iLIVING shutter fans. Rugged, Weather Resistant Enclosure. Designed for standard 2" x 4" Electrical Wall Box. Provides energy efficient operation of power attic ventilators. Humidity range from 30 to 90 percent. Not to be used with Capacitor Start or Capacitor Run Motors.

Can be wired to an automatic thermostat not included. Allows equalization of inside and outside attic temperatures. Applications: fans, humidifiers, Attic Fans, Blowers, fireplace Blowers, Ventilators. Intake or Exhaust Shutter. Provides energy-efficient operation of power attic ventilators. Not to be used with Capacitor Start or Capacitor Run Motors.

Motorized Exhaust/Intake Shutter Kit 16" - Kit comes complete with Aluminum Shutter, Motor and Hardware to install motor shutter mounting hardware not included. Perfect inlet for greenhouses, garages or any area that needs ventilation. Brushed aluminum switch plate and screws included. One control for Heating and/or Cooling. Meets ul and CSA Requirements.

Temperature is fan On/Off.

More information about ACER Trading Group AS12


Similar products:


KB Electronics Model KBWC-18K UL Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC for use with Shaded Pole and PSC Motors

KB Electronics H9011 - Applications: fans, fireplace Blowers, Humidifiers, Blowers, attic Fans, Ventilators.5. 0 max amps 115 volts; UL & CSA Approved. Humidity range from 30 to 90 percent. Temperature range from 50 degrees to 120 degrees Fahrenheit. Rugged, Weather Resistant Enclosure. Perfect for Greenhouses, Garages or small areas.

Control provides infinite variable speed for shaded pole and PSC motors. 120v, 8a; ul listed. Adjustable bi-metallic switch. Not to be used with Capacitor Start or Capacitor Run Motors. One control for Heating and/or Cooling. 2. 5 max amps 115 volts; UL & CSA Approved. Not to be used with Capacitor Start or Capacitor Run Motors.

KB Electronics Model KBWC-18K UL Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC for use with Shaded Pole and PSC Motors - Temperature is fan On/Off. Adjustable temperature range from 50 degrees to 120 degrees Fahrenheit. Rotary Type with on/off function. Designed for standard 2" x 4" Electrical Wall Box. Provides energy efficient operation of power attic ventilators. Multi-positional Mounting Offers Flexibility in New or Existing Installations.

More information about KB Electronics H9011


Similar products:


KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K177-1006

KB Electronics 8811007 - Meets ul and CSA Requirements. Applications: fans, attic Fans, Fireplace Blowers, Humidifiers, blowers, Ventilators. Precision fan speed controller. Remove excess heat from an attic in summer and humidity in winter. Provides energy efficient operation of power attic ventilators. 8. 0 max amps 115 volts; UL & CSA Approved.

Perfect for Greenhouses, Garages or small areas. Designed for standard 2" x 4" Electrical Wall Box. 6. 0 max amps 115 volts; UL & CSA Approved. Multi-positional Mounting Offers Flexibility in New or Existing Installations. Designed for standard 2" x 4" Electrical Wall Box. 5. 0 max amps 115 volts; UL & CSA Approved.

KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K177-1006 - This is an oem part intended for use with iLIVING shutter fans. Not to be used with Capacitor Start or Capacitor Run Motors. Adjustable bi-metallic switch. Humidity range from 30 to 90 percent. Not to be used with Capacitor Start or Capacitor Run Motors.

More information about KB Electronics 8811007


Similar products:


Nutone RFTH95 Attic Ventilator Replacement Thermostat, Automatic

Nutone CECOMINOD045161 - Meets ul and CSA Requirements. Not to be used with Capacitor Start or Capacitor Run Motors. Not to be used with Capacitor Start or Capacitor Run Motors. Not to be used with Capacitor Start or Capacitor Run Motors. Applications: fans, blowers, Attic Fans, fireplace Blowers, Humidifiers, Ventilators. Intake or Exhaust Shutter.

Applications: fans, blowers, Humidifiers, fireplace Blowers, Attic Fans, Ventilators. Automatically activates fan to exhaust heat from attic For use with power attic fans. Easy to install. 10-amp adjustable thermostat. Temperature range from 50 degrees to 120 degrees Fahrenheit. Applications: fans, attic Fans, Blowers, Fireplace Blowers, Humidifiers, Ventilators.

Nutone RFTH95 Attic Ventilator Replacement Thermostat, Automatic - Designed for standard 2" x 4" Electrical Wall Box. Adjustable bi-metallic switch. This is an oem part intended for use with iLIVING shutter fans. Provides energy efficient operation of power attic ventilators. Applications: fans, humidifiers, Fireplace Blowers, blowers, Attic Fans, Ventilators. Precision fan speed controller.

Allows equalization of inside and outside attic temperatures.

More information about Nutone CECOMINOD045161


Similar products: