Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling for Fermentation Kegerator Heating Mat ect

Lerway Tech SYNCHKG084064 - 10a, 100v ~240v ac dimension body: 140x68x33mm 5. 5x2. 7x1. 3inch socket: 85x42x24mm3. 3x1. 7x1inch sensor Length: 2m / 6. 56ft input power Cable Length: 1. 5m 5ft output power cable length: 30cm 1ft buzzer alarm: high and Low Temperature Alarm Temperature calibration Over-temperature and sensor fault alarm Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

Features: temperature control range : -50~99 °C / -58~210 ° F Temperature Resolution: 01 ° c / 01° f temperature accuracy: ±1°c -50 ~ 70°c / ±1°f -50 ~ 160° f temperature control mode :on/off control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max.

Sensor type: ntc sensor including ambient temperature: -30~ 75 ° c / -22~ 167 ° f storage temperature: -20~ 60 ° c / -4~ 140 ° F Humidity 20~85% No Condensate Warranty: 1 Year It has certificate of EMC, LVD, RoHS, FCC compliance. Package content: 1x temperature controller itc308 1x Manual Simple to use: plug it in, place the probe, set the temp ranges, plug in the heater/cooler into the marked outlet.

Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling for Fermentation Kegerator Heating Mat ect - Be able to connect with refrigeration and heating equipment at the same time. Easily calibrated. Can display in Centigrade or Fahrenheit. Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.

More information about Lerway Tech SYNCHKG084064

Fermentation Heater by The Weekend Brewer

COMINHKPR125665 - Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller. 35 watts. Upgraded electrical connections. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel. At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters.

Accurate temperature control. Secure it around your carboy or bucket using electrical tape. It has everything you need for exact temperature control in colder environments. Now manufactured with clip connections which are safer and will last longer than other heaters on the market. Carboy, temperature controller, and thermowell NOT included.

Fermentation Heater by The Weekend Brewer - Perfect for all size fermenters. Search b01ifvssrm on Amazon to find ours. Search b01n37atgl on amazon for our Heating Kit. Even heat. For more control, pair with a digital temperature controller and thermowell. This flexible heater is perfect for home beer and wine making.

More information about COMINHKPR125665


Similar products:


Homebrew #7 Stopper Thermowell

COMINHKPR141218 - Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller. Silicon stopper makes a much better seal than rubber when properly dried. Accurate temperature control. The included #7 stopper fits most standard glass carboys. Stainless steel thermowell to ensure it never rusts and is easy to clean.

Perfect for all size fermenters. Now manufactured with clip connections which are safer and will last longer than other heaters on the market. Search b01ifvssrm on Amazon to find ours. Search b01n37atgl on amazon for our Heating Kit. It has everything you need for exact temperature control in colder environments.

Homebrew #7 Stopper Thermowell - Sanitary temperature control. Upgraded electrical connections. Search b01ifvssrm on amazon to get a great temperature controller to pair with this thermowell. Even heat. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel. Use this stopper thermowell to get your temperature controller probe in contact with your beer without risking contamination.

Fits standard glass carboys.

More information about COMINHKPR141218


Similar products:


Inkbird AC 110V Digital Pre-wired Outlet Dural Stage Humidity Controller with Sensor, Dehumidification Humidifaction Control for Humidifier Dehumidifier Greenhouse Reptile Exhaust Fan Charcuterie

Inkbird Tech IHC200S - Its play-n-plug designed: Plug it into wall socket, set your controller's humidification or dehumidification values to your need. It can fit many residential humidifier and dehumidifier. In addition, the humidifier and dehumidifier can be programmed separately, too. It is widely used for mushroom, mini greenhouse, crawl space, turtle enclosure, ventilator fan, snake cage, curing chanmber, tobacco cage and so on.

Feature: power input: 100 ~240vac, 50Hz/60Hz Power Output: Max. It can maintain the humidity between humidification and dehumidification automatically. It is an easy-to-use, safe and reliable dual relay output humidity controller. The maximum electrical load is 10A. 10a, 100v ~240v ac humidity measuring Range : 5%-99.

Inkbird AC 110V Digital Pre-wired Outlet Dural Stage Humidity Controller with Sensor, Dehumidification Humidifaction Control for Humidifier Dehumidifier Greenhouse Reptile Exhaust Fan Charcuterie - 99%rh humidity control range : 5%-99%rh resolution: 1%rh accuracy: ±3%RH Sensor model: AM-2301 Sensor stability:.

More information about Inkbird Tech IHC200S


Similar products:


Homebrew Fermentation Heater by TheBrewersCorner

TheBrewersCorner COMINHKPR111542 - Upgraded electrical connections. The included #7 stopper fits most standard glass carboys. Stainless steel thermowell to ensure it never rusts and is easy to clean. Brand new Perfect for all size fermenters. Even heat. Search b01ifvssrm on Amazon to find ours. Search b01n37atgl on amazon for our Heating Kit. Use this stopper thermowell to get your temperature controller probe in contact with your beer without risking contamination.

Now manufactured with clip connections which are safer and will last longer than other heaters on the market. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel. At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters.

Homebrew Fermentation Heater by TheBrewersCorner - Calibrate the humidity value, Delay protection for Control output, Query current temperature. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller. Alarm when humidity exceeds high/low humidity setting value. Search b01ifvssrm on amazon to get a great temperature controller to pair with this thermowell.

Silicon stopper makes a much better seal than rubber when properly dried. Alarm when sensor error or humidity exceeds limit.

More information about TheBrewersCorner COMINHKPR111542


Similar products:


Bev Rite Air Distributor 5/16", CO2 Manifold Select 2 , 3 or 4 Way 3 Way

Chill Passion Inc. CPG223 - Homebrew Fermentation Heater. High quality construction. It has everything you need for exact temperature control in colder environments. Sanitary temperature control. Search b01ifvssrm on Amazon to find ours. Search b01n37atgl on amazon for our Heating Kit. Perfect for all size fermenters. Alarm when humidity exceeds high/low humidity setting value.

Search b01ifvssrm on amazon to get a great temperature controller to pair with this thermowell. Control humidity by setting value and differential value. Even heat. Aluminum Body. Silicon stopper makes a much better seal than rubber when properly dried. Upgraded electrical connections. Shutoffs with check valves.

Bev Rite Air Distributor 5/16", CO2 Manifold Select 2 , 3 or 4 Way 3 Way - Alarm when sensor error or humidity exceeds limit. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel. Run multiple lines from one CO2 source. The distributor allows you to split gas supply into multiple lines. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller.

More information about Chill Passion Inc. CPG223


Similar products:


Homebrew 1/4" Stainless Steel Thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe

G Francis Brew - The thermowell is removable from the stopper to fit different sized configurations. Dry the carboy surface and the stopper, place a probe inside the tube and then inside your beer fermentation vessel. Fits standard glass carboys. At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters.

Control humidity by setting value and differential value. Francis® homebrew 1/4" stainless steel thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe for accurate positioning and readings even deep inside the fermenting bucket. The included #7 silicone stopper has an airlock hole to prevent your carboy from building up pressure.

Homebrew 1/4" Stainless Steel Thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe - Controlling temperature is vital for good fermentation, so use the G. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel. 5/16" barbed inlet and 5/16" barbed outlets. Monitor fermentation: the g. Perfect for all size fermenters. Alarm when humidity exceeds high/low humidity setting value.

Silicon stopper makes a much better seal than rubber when properly dried. Switch the modes between humidification and dehumidification automatically.

More information about G Francis Brew


Similar products:


Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz.

Brewer's Edge UX-CAOO-IQIT - Secure fit: constructed with a stainless-steel tube and silicone bung stopper; make sure the carboy surface and the stopper itself are dry in order for it to stay secure once pressed into carboy; Approximate 025-inch 6mm tube inside diameter ID; 15. 5-inch 39. 4cm overall length; 14. 25-inch 36. 2cm tube and 1.

1-inch 2. 8cm stopper. 5/16" barbed inlet and 5/16" barbed outlets. Conditions keg gaskets. It has everything you need for exact temperature control in colder environments. Sanitary temperature control. Perfect for all size fermenters. Control humidity by setting value and differential value. Aluminum Body. Homebrew Fermentation Heater.

Brewer's Edge UX-CAOO-IQIT Keg Lube, 1 oz. - At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters. Use your carboy: compatible with most standard glass carboys, temperature controllers, and airlocks; The thermowell is entirely removable from the stopper to fit different sized configurations #10 stoppers are recommended for plastic carboys.

Shutoffs with check valves.

More information about Brewer's Edge UX-CAOO-IQIT


Similar products:


Universal Kegco type O-Ring Five Gasket Sets for Cornelius Home Brew Keg and Homebrewed With Pride keg sticker

stir-plate 5KegOringKit - Homebrew Fermentation Heater. Includes o-ring chart and a 1-2/3" diameter "HOMEBREWED WITH PRIDE" keg label! Upgraded electrical connections. Can be used for rubber and plastic parts. O-ring set includes: 5 lid closure o-rings 10 ball lock tank Plug O-Rings 10 Pin Lock Tank Plug O-Rings 10 Universal Dip Tube O-Rings.

Includes o-ring chart and a 1-2/3" diameter "homEBREWED WITH PRIDE" keg label! Perfect for all size fermenters. Search b01ifvssrm on amazon to get a great temperature controller to pair with this thermowell. 5/16" barbed inlet and 5/16" barbed outlets. Aluminum Body. Monitor fermentation: the g. Shutoffs with check valves.

Universal Kegco type O-Ring Five Gasket Sets for Cornelius Home Brew Keg and Homebrewed With Pride keg sticker - Switch the modes between humidification and dehumidification automatically. Combination set: in addition to the thermowell, the included #7 bung plug stopper has an airlock hole with a 025-inch 6mm diameter for standard size airlock to prevent your carboy from building up pressure; The stopper has a 1. 3-inch 33mm top diameter and 0

9-inch 24mm bottom diameter and includes all hardware needed for exact temperature control even in colder environments. Accurate temperature control.

More information about stir-plate 5KegOringKit


Similar products:


Accuflex Red PVC Tubing, 5/16in ID x 10ft

Accuflex CPHR516X10 - Accurate temperature control. Food grade lubricant. Alarm when sensor error or humidity exceeds limit. Ideal for CO2 supply lines. Silicon stopper makes a much better seal than rubber when properly dried. Switch the modes between humidification and dehumidification automatically. This complete o-ring set replaces all the gaskets you will need to refurbish five used home brew kegs.

Universal kit - fits Ball Lock Pepsi and Pin Lock Coke kegs! Now manufactured with clip connections which are safer and will last longer than other heaters on the market. Red, food-grade pvc tubing is ideal for air supply lines in draft beer, soda and other beverage systems. Calibrate the humidity value, Delay protection for Control output, Query current temperature.

Accuflex Red PVC Tubing, 5/16in ID x 10ft - Nsf listed red, food-grade & flexible tubing. Upgraded electrical connections. Aluminum Body. Fits standard glass carboys. Search b01ifvssrm on Amazon to find ours. Search b01n37atgl on amazon for our Heating Kit. Sold per 10 foot length.

More information about Accuflex CPHR516X10


Similar products:


ATP Vinyl-Flex PVC Food Grade Plastic Tubing, Clear, 3/16" ID x 5/16" OD, 100 feet Length

Advanced Technology Products (ATP) PVC316-516ANA - Low density pvc tubing offers the best combination of low taste and odor transfer and resistance to stress cracking. Shutoffs with check valves. Switch the modes between humidification and dehumidification automatically. Usp class VI rated materials. O-ring set includes: 5 lid closure o-rings 10 ball lock tank Plug O-Rings 10 Pin Lock Tank Plug O-Rings 10 Universal Dip Tube O-Rings.

Includes o-ring chart and a 1-2/3" diameter "HOMEBREWED WITH PRIDE" keg label! Ideal for CO2 supply lines. Use your carboy: compatible with most standard glass carboys, temperature controllers, and airlocks; The thermowell is entirely removable from the stopper to fit different sized configurations #10 stoppers are recommended for plastic carboys.

ATP Vinyl-Flex PVC Food Grade Plastic Tubing, Clear, 3/16" ID x 5/16" OD, 100 feet Length - Control humidity by setting value and differential value. Nsf listed red, food-grade & flexible tubing. Made from a pvc compound that complies with FDA regulations. At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters. Although it is not primarily intended for use in higher pressure applications it does provide good chemical resistance is lightweight flexible phthalate free and economically priced.

Atp vinyl-flex pvc nsf 61 tubing is suitable for general low-pressure industrial applications for the conveyance of liquids and semi solids. Now manufactured with clip connections which are safer and will last longer than other heaters on the market.

More information about Advanced Technology Products (ATP) PVC316-516ANA


Similar products: