MINI SPLIT CABLE 25FT LENGTH

Cut from spool. Black exterior jacket. Can be cut for an exact installation. 25 ft 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units. 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units.

Ul listed, color coded, Contractors Grade, Stranded. Design to fit all ductless mini Split Air Conditioner and Heat Pump Systems specifying 4 Conductor Control Cable.

---

20 Ft Drain Hose for Ductless Mini Split Air Conditioner Heat Pump Systems; 5/8 ID

Drain hose for ductless mini split air conditioner heat pump systems; contractors Grade, non-insulated; 5/8 ID, Can be cut for an exact installation 20 ft drain hose for ductless mini Split Air Conditioner Heat Pump Systems 5/8 ID. Design to fit all ductless mini split Air Conditioner and Heat Pump Systems specifying 5/8 ID Drain Line.

Contractors Grade, non-insulated. Can be cut for an exact installation.


Similar products:

---

Southwire 55189407 1/2-Inch 6-Feet 10/3 ULTRA Whip-Pre-Assembled Non-Metallic Liquid tight Hook-Up Whip

Constructed with two different PVC materials. 20 ft drain hose for ductless mini Split Air Conditioner Heat Pump Systems 5/8 ID. Ul / csa, complies with NEC Article 356. 600-volt. Twelve-inch wire leads are left exposed at each end. Liquidtight flexible Non-metallic Conduit Type B LFNC-B Fittings. Design to fit all ductless mini split Air Conditioner and Heat Pump Systems specifying 5/8 ID Drain Line.

Can be cut for an exact installation. 600 volt stranded copper thhn/tHWN conductors and UL Listed LFNC-B fittings. Resistant to rust, cracks, and separation. Intended for 208/240/480 volt. Contractors Grade, non-insulated. Stranded copper THHN/THWN Insulated Singles. Highly flexible Non-metallic Conduit with Factory Installed Conductors.

Green insulated Copper Grounding Conductor. Green insulated copper grounding conductor. Intended for 208/240/480-Volt Single Phase Circuits.


Similar products:

---

Siemens WN2060U Non-Fused AC Disconnect

Intended for 208/240/480-Volt Single Phase Circuits. 20 ft drain hose for ductless mini Split Air Conditioner Heat Pump Systems 5/8 ID. 60 amp. Non-fused. Pull out type. Stranded copper THHN/THWN Insulated Singles. Green insulated Copper Grounding Conductor. Outdoor rated. Design to fit all ductless mini split Air Conditioner and Heat Pump Systems specifying 5/8 ID Drain Line.

Highly flexible Non-metallic Conduit with Factory Installed Conductors. 600-volt. Can be cut for an exact installation. Liquidtight flexible Non-metallic Conduit Type B LFNC-B Fittings. Ul listed. Contractors Grade, non-insulated.


Similar products:

---

Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. 60 amp. Fits 9000-36000 Btu Unit. Liquidtight flexible Non-metallic Conduit Type B LFNC-B Fittings. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

Green insulated Copper Grounding Conductor. Universal heavy duty outdoor wall bracket. Pull out type. Intended for 208/240/480-Volt Single Phase Circuits. Ul listed. Non-fused. Used for supporting condensing units up to 350 pounds, this bracket features a crossbar that is attached to the wall, and two L-shaped support brackets that are hooked and bolted into place on the crossbar.

Dimensions: Width: 33. 5" height: 18" depth: 22". It includes hardware for ser and expansion bolts for wall mounting. Can be cut for an exact installation. Design to fit all ductless mini split Air Conditioner and Heat Pump Systems specifying 5/8 ID Drain Line.


Similar products:

---

Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps

B. E. Ultra durable PVC plastic material with neutral light beige color. One 24” flexible length. As an alternative to ground level pads, vandalism, snow, floods, debris, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, etc. Two l-shaped brackets foldable, 8.

8 grade bolts with lock nuts, wall fixation kit, Cross bar, Anti-vibration feet ungraded to 1 1/2 inches tall!. Slight rearward tilt to wall is recommended for safety purposes. Protects the line set, wiring and drainage lines from weather and other elements. Fits 9000-36000 Btu Unit. Stranded copper THHN/THWN Insulated Singles.

Highly flexible Non-metallic Conduit with Factory Installed Conductors. Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. 20 ft drain hose for ductless mini Split Air Conditioner Heat Pump Systems 5/8 ID. One reducer, and two couplings. Ul listed. One 20” flexible length, for condenser connection.




Similar products:

---

Ductless Mini Split System charging vacuum port adapter, Converts new R410a style 5/16 SAE service ports to accept older 1/4 SAE gauge hoses.

The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Fits 9000-36000 Btu Unit. Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. Can be cut for an exact installation. Green insulated Copper Grounding Conductor. Convenient for any job.

Pull out type. Dimensions: Width: 33. 5" height: 18" depth: 22". Outdoor rated. Liquidtight flexible Non-metallic Conduit Type B LFNC-B Fittings. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Used on most newer R410A Ductless Mini Split Systems. Non-fused. Ultra durable PVC plastic material with neutral light beige color. Universal heavy duty outdoor wall bracket. Covers and hides unsightly refrigeration pipes on your external walls.

New r410a ductless mini split systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system ie R22.


Similar products:

---

Hide-A-Line 4" 14 Ft Mini split and Central Air Conditioner & Heat Pump Line Set Cover Kit Decorative Tubing Cover

Green insulated Copper Grounding Conductor. Universal heavy duty outdoor wall bracket. Paintable. Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. Tube material makes easy cut to fit installations. It includes hardware for ser and expansion bolts for wall mounting. Used on most newer R410A Ductless Mini Split Systems.

Can be cut for an exact installation. 600-volt. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Standard professional Grade For Durability And Weather Resistant. Brass construction, with full swivel tip.

Kit includes: 439" tube, 3 couplers, 1 wall cover, 1 Horizontal Universal 90-120° elbow and 1 End cap. Highly flexible Non-metallic Conduit with Factory Installed Conductors. Dimensions: Width: 33. 5" height: 18" depth: 22". Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Outdoor rated.




Similar products:

---

Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant

20 ft drain hose for ductless mini Split Air Conditioner Heat Pump Systems 5/8 ID. Intended for 208/240/480-Volt Single Phase Circuits. 60 amp. Design to fit all ductless mini split Air Conditioner and Heat Pump Systems specifying 5/8 ID Drain Line. Paintable. Standard professional Grade For Durability And Weather Resistant.

5/16" female, 1/4" Male SAE. Used on most newer R410A Ductless Mini Split Systems. Convenient for any job. Brass construction, with full swivel tip. Universal heavy duty outdoor wall bracket. Ul listed. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

600-volt. Outdoor rated. Color - white/Paintable; Hardware Included. Contractors Grade, non-insulated. Refrigeration Technologies. As an alternative to ground level pads, floods, debris, vandalism, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, etc.




Similar products:

---

7.5 Ft Line Set Cover Kit 3" for Mini Split and Central Air Conditioner & Heat Pump Line Set Cover Kit Decorative Tubing Cover

Tube material Makes Easy Cut to Fit Installations. Paintable. Tube material Makes Easy Cut to Fit Installations. 60 amp. Stranded copper THHN/THWN Insulated Singles. Outdoor rated. 20 ft drain hose for ductless mini Split Air Conditioner Heat Pump Systems 5/8 ID. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

5/16" female, 1/4" Male SAE. It includes hardware for ser and expansion bolts for wall mounting. Brass construction, with full swivel tip. Contractors Grade, non-insulated. Refrigeration Technologies. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Dimensions: Width: 33.

5" height: 18" depth: 22". Standard professional Grade For Durability And Weather Resistant. Ul listed. Interior and exterior application. Ultra durable PVC plastic material with neutral light beige color. Tube material makes easy cut to fit installations.


Similar products:

---

20Ft, - Diversitech 230-DL16-20 Mini-Split Dl, 5/8In.Id

Can be added to any previous and existing installation with ease. Design to fit all ductless mini split Air Conditioner and Heat Pump Systems specifying 5/8 ID Drain Line. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

Adds a great addition to any work. Intended for 208/240/480-Volt Single Phase Circuits. Universal heavy duty outdoor wall bracket. Ultra durable PVC plastic material with neutral light beige color. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Made in United states. Standard professional Grade For Durability And Weather Resistant.

Fits 9000-36000 Btu Unit. Standard professional Grade For Durability And Weather Resistant. Pull out type. Paintable. Tube material Makes Easy Cut to Fit Installations. Includes: 2 39" hide-a-line tubing 3"; 1 wall cover Cap 3"; 1 Coupler 3"; 1 End Cap 3". As an alternative to ground level pads, vandalism, floods, debris, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, etc.




Similar products: