Nitrogen Purging Adapter For ACR Pipe

#ad
JB INDUSTRIES BRZ-1000 #ad - Working pressure: 500 psi width: 1-1/4" Country of Origin subject to change: United States. Nitrogen purging adaptor, Color Silver, Steel Material, Max. Working pressure 500 psi, 4-1/2 In. Length, width 1-1/4 In. For use with acr pipe, nitrogen purge for brazing, includes schrader body ' Price for: each includes: schrader body item: nitrogen purging adaptor length: 4-1/2" material: Steel Application: Nitrogen Purge For Brazing Color: Silver Max.

More information about JB INDUSTRIES BRZ-1000 #ad

Uniweld NV1 NitroVue Nitrogen Flow Indicator

#ad
Uniweld NV1 #ad - Scale build up inside the tubing can cause blockage in the TXV and within the Air Conditioning and Refrigeration system resulting in premature failure. The nv1 can be used with complete confidence because it is protected from over pressure with a reseatable safety blow off that opens at 200 psi. Uniweld's nv1 nitroVue Nitrogen Flow Indicator is nitrogen purging simplified.

The nv1 must be connected to a Nitrogen Regulator with the delivery pressure set at 60 psi to control the nitrogen gas pressure. Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas. The easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas during the brazing of copper tubing in Air Conditioning and Refrigeration systems.

Uniweld NV1 NitroVue Nitrogen Flow Indicator #ad - Purge the copper lines at 20+ scfh and then reduce the flow to Braze at 3-5 SCFH during the brazing process. The nitrogen must be flowing to displace the oxygen inside the tubing during the brazing process, preventing internal oxidation and the resulting scale. Protected from over pressure with a reseatable safety blow off that opens at 200 psi.

The bright orange float ball visually confirms the flow of nitrogen gas and allows the technician to first "Purge" the copper lines at 20+ SCFH and then reduce the flow to "Braze" at 3-5 SCFH during the brazing process thus conserving its consumption and reducing operating cost. Bright orange float ball visually confirms the flow of nitrogen gas.

If the orange ball does not rise in the tube there is no flow of nitrogen, only static pressure and oxygen is not being displaced.

More information about Uniweld NV1 #ad


Similar products:


Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

#ad
Uniweld RHP400 #ad - F36 adaptor, co2 cylinder cga320 to Nitrogen Regulator CGA580 purchased separately. Gb20s. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. G8sd with protective rubber gauge boots Part No. Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately.

Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system. G7sd and delivery gauge 0-600 PSI Part No. Regulator with cga580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve not designed to protect downstream system and easy to read 2 inch Contents Gauge 0-4000 PSI Part No.

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection #ad - Purge the copper lines at 20+ scfh and then reduce the flow to Braze at 3-5 SCFH during the brazing process. Protected from over pressure with a reseatable safety blow off that opens at 200 psi. Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.

Regulator can be used with CO2 with the Uniweld part no. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Bright orange float ball visually confirms the flow of nitrogen gas.

More information about Uniweld RHP400 #ad


Similar products:


Uniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection

#ad
Uniweld UNF3 #ad - Nitrogen regulator, Delivery Pressure 0-400 PSI. Maximum inlet Pressure 50 PSI. Protected from over pressure with a reseatable safety blow off that opens at 200 psi. Nitrogen flow indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of copper tubing in HVACR systems. Cga580 inlet connection, 1/4 inch male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.

Scale build up inside the tubing can cause blockage in the TXV and within the Air Conditioning and Refrigeration system resulting in premature failure. Provides extremely low pressure 3 to 4 CFH precision gas flow control for nitrogen purging applications. Nitrogen flow indicator, 1/4 inch female Flare Inlet Connection, 1/4 Inch Male Flare Outlet Connection.

Uniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection #ad - . Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately. The unf3 maximum inlet pressure is 50 psi and must be connected to a Nitrogen Regulator with 1/4 inch male flare outlet connection Uniweld Part No. Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.

Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. The nitrogen must be flowing to displace the oxygen inside the tubing during the brazing process, preventing internal oxidation and the resulting scale.

More information about Uniweld UNF3 #ad


Similar products:


5/16" System Connection - Appion MGAVCR Mega Flow Vacuum Rated Valve Core Removal Tool

#ad
Appion MGAVCR #ad - Maximum inlet Pressure 50 PSI. Nitrogen regulator, Delivery Pressure 0-400 PSI. Protected from over pressure with a reseatable safety blow off that opens at 200 psi. Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas. Bright orange float ball visually confirms the flow of nitrogen gas.

Purge the copper lines at 20+ scfh and then reduce the flow to Braze at 3-5 SCFH during the brazing process. Regulator can be used with co2 with the uniweld part no F36 adaptor, CO2 Cylinder CGA320 to Nitrogen Regulator CGA580 purchased separately. Nitrogen flow indicator, 1/4 inch female Flare Inlet Connection, 1/4 Inch Male Flare Outlet Connection.

5/16" System Connection - Appion MGAVCR Mega Flow Vacuum Rated Valve Core Removal Tool #ad - Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system. Rated for r410a systems. Nitrogen flow indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of copper tubing in HVACR systems. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.

Doubles as a 5/16" to 1/4" adapter. Use the vacuum-certified megaflow Valve core removal tool to remove restrictive access Valve cores for high-speed recovery and evacuation.

More information about Appion MGAVCR #ad


Similar products: