Senville SENL-12CD 12000 BTU 15 SEER Split Air Conditioner and Heat Pump, Mini

Senville SENL-12CD - Low ambient kit - cool and heat your room even in temperatures as low as -5F. Inverter compressor by Toshiba - 5 Year Warranty. Includes easy installation Kit with 16 Ft. Whisper technology for quiet Operation, Great for Bedrooms, Additions, Living Rooms and Commercial Applications. Item may ship in more than one box and may arrive separately.

Mini split ductless air Conditioner and Heater - 15 SEER. Enjoy powerful cooling and heating with this efficient mini split air conditioner. The leto series by senville offers affordability and is great for most applications, additions, including single rooms, garages, restaurants and more. The leto series by senville is backed by a 1 Year Parts/5 Year Compressor Manufacturer’s Warranty.

Senville SENL-12CD 12000 BTU 15 SEER Split Air Conditioner and Heat Pump, Mini - Copper Line Set. This compact mini split provides heating and cooling up to 5F/-15C, powered by a GMCC Toshiba compressor.

More information about Senville SENL-12CD

Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit 2P For 9000 and 12000 BTU Condensers

Pioneer BRK-FLD-2P - Heavy duty steel bracket, made with ultra galvanized steel and epoxy paint for installing mini split condensing units againt the wall properly. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.

Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from.

More information about Pioneer BRK-FLD-2P


Similar products:


Ductless Mini Split System charging vacuum port adapter, Converts new R410a style 5/16 SAE service ports to accept older 1/4 SAE gauge hoses.

Pioneer WYS-POAD-BRS - 5/16" female, 1/4" Male SAE. Port adapter converts the 5/16" SAE ports to use with 1/4" SAE gauge sets. Used on most newer R410A Ductless Mini Split Systems. New r410a ductless mini split systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system ie R22.

Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Convenient for any job. This new port size is 5/16" saE and some gauge sets carry 1/4" SAE connectors.

Ductless Mini Split System charging vacuum port adapter, Converts new R410a style 5/16 SAE service ports to accept older 1/4 SAE gauge hoses. - Brass construction, with full swivel tip. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from.

More information about Pioneer WYS-POAD-BRS


Similar products:


MINI SPLIT CABLE 25FT LENGTH

DuctlessAire TC-14/4 25 - Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units.

Can be cut for an exact installation. Black exterior jacket. Ul listed, contractors Grade, Color Coded, Stranded. Design to fit all ductless mini Split Air Conditioner and Heat Pump Systems specifying 4 Conductor Control Cable. Convenient for any job. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.

MINI SPLIT CABLE 25FT LENGTH - Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Brass construction, with full swivel tip. 25 ft 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units. Used on most newer R410A Ductless Mini Split Systems.

Cut from spool.

More information about DuctlessAire TC-14/4 25


Similar products:


Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps

pioneer air conditioner WYS-LCVR-KIT - One 20” flexible length, for condenser connection. G. Finish up your ductless mini splut unit installation for a professionally installed look. 5/16" female, 1/4" Male SAE. Black exterior jacket. Covers and hides unsightly refrigeration pipes on your external walls. Can be added on to new or existing installations.

Ul listed, contractors Grade, Color Coded, Stranded. Design to fit all ductless mini Split Air Conditioner and Heat Pump Systems specifying 4 Conductor Control Cable. Two different types of 90 degree elbows. One 24” flexible length. Can be cut for an exact installation. Brass construction, with full swivel tip.

Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps - H. Used on most newer R410A Ductless Mini Split Systems. Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. Convenient for any job. Three straight lengths of 32 inches each. C.

More information about pioneer air conditioner WYS-LCVR-KIT


Similar products:


Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

DuctlessAire FBA_CECOMINOD072410 - Fits 9000-36000 Btu Unit. Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. Dimensions: Width: 33. 5" height: 18" depth: 22". It includes hardware for ser and expansion bolts for wall mounting. Used on most newer R410A Ductless Mini Split Systems. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

Ul listed, color Coded, contractors Grade, Stranded. Design to fit all ductless mini Split Air Conditioner and Heat Pump Systems specifying 4 Conductor Control Cable. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, debris, snow, floods and other perils.

Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser - Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. 25 ft 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.

4 rubber vibration absorbers also included. 4 sizes to choose from.

More information about DuctlessAire FBA_CECOMINOD072410


Similar products:


Siemens WN2060U Non-Fused AC Disconnect

Siemens WN2060U - 5-5/32" x 7-5/16" x 2-7/32". Covers and hides unsightly refrigeration pipes on your external walls. Can be cut for an exact installation. 60 amp. Universal heavy duty outdoor wall bracket. Ul listed. Ul listed. As an alternative to ground level pads, snow, vandalism, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, debris, etc.

Two l-shaped brackets foldable, Wall fixation kit, cross bar, 8.8 grade bolts with lock nuts, Anti-vibration feet ungraded to 1 1/2 inches tall! Slight rearward tilt to wall is recommended for safety purposes. Outdoor rated. Brass construction, with full swivel tip. Single phase, 2 wire, 2 pole, 240 volt, rated 10 HP, steel enclosure.

Siemens WN2060U Non-Fused AC Disconnect - 25 ft 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units. Pull out type. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. 5/16" female, 1/4" Male SAE. Used on most newer R410A Ductless Mini Split Systems.

More information about Siemens WN2060U


Similar products:


Southwire 55189407 1/2-Inch 6-Feet 10/3 ULTRA Whip-Pre-Assembled Non-Metallic Liquid tight Hook-Up Whip

Southwire 55189407 - Ul / csa, complies with NEC Article 356. Green insulated Copper Grounding Conductor. As an alternative to ground level pads, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, vandalism, floods, debris, etc. Two l-shaped brackets foldable, Wall fixation kit, cross bar, 8.

8 grade bolts with lock nuts, Anti-vibration feet ungraded to 1 1/2 inches tall! Slight rearward tilt to wall is recommended for safety purposes. Stranded copper THHN/THWN Insulated Singles. Intended for 208/240/480-Volt Single Phase Circuits. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

Southwire 55189407 1/2-Inch 6-Feet 10/3 ULTRA Whip-Pre-Assembled Non-Metallic Liquid tight Hook-Up Whip - Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. Ul listed. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. 600 volt stranded copper thhn/tHWN conductors and UL Listed LFNC-B fittings.

Black exterior jacket. Convenient for any job. It includes hardware for ser and expansion bolts for wall mounting.

More information about Southwire 55189407


Similar products:


Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit 3P For 18000 and 24000 BTU Condensers

Pioneer BRK-FLD-3P - Intended for 208/240/480-Volt Single Phase Circuits. It includes hardware for ser and expansion bolts for wall mounting. Most suitable for systems with 9000 and 12000 BTU and some 18000 BTU capacities. Stranded copper THHN/THWN Insulated Singles. 5/16" female, 1/4" Male SAE. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

Can be cut for an exact installation. Heavy duty steel bracket, made with ultra galvanized steel and epoxy paint for installing mini split condensing units againt the wall properly. Covers and hides unsightly refrigeration pipes on your external walls. Heavy duty steel Construction, Galvanized and Epoxy Painted.

Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit 3P For 18000 and 24000 BTU Condensers - Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, debris, snow, floods and other perils.

600-volt. Fits 9000-36000 Btu Unit.

More information about Pioneer BRK-FLD-3P


Similar products:


Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant

Refrigeration Technologies RT201B - Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. 600-volt. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

Can be cut for an exact installation. It includes hardware for ser and expansion bolts for wall mounting. Can be added to any previous and existing installation with ease. 25 ft 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units.

Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant - Brass construction, with full swivel tip. Liquidtight flexible Non-metallic Conduit Type B LFNC-B Fittings. Convenient for any job. Pull out type. Outdoor rated. Covers and hides unsightly refrigeration pipes on your external walls. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.

More information about Refrigeration Technologies RT201B


Similar products:


Diversitech 230-DL16-20 Mini-Split Dl, 5/8In.Id - 20Ft,

Diversitech 230-DL16-20 - It includes hardware for ser and expansion bolts for wall mounting. Nylog-gasket/thread sealant. Brass construction, with full swivel tip. Enhance your home with a perfect Mix of form and function. Highly flexible Non-metallic Conduit with Factory Installed Conductors. Pick the bracket that fits the BTU output of your machine.

Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. 25 ft 14 gauge 4 conductor control cable for Ductless Mini Split Air Conditioner and Heat Pump Systems goes between indoor and outdoor units.

Diversitech 230-DL16-20 Mini-Split Dl, 5/8In.Id - 20Ft, - Stranded copper THHN/THWN Insulated Singles. Universal heavy duty outdoor wall bracket. 600-volt. Liquidtight flexible Non-metallic Conduit Type B LFNC-B Fittings. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.

4 rubber vibration absorbers also included. 4 sizes to choose from. 5/16" female, 1/4" Male SAE.

More information about Diversitech 230-DL16-20


Similar products: