WINGONEER 5PCS Water Level Sensor Liquid Water Droplet Depth Detection Sensor for Arduino

#ad
WINGONEER #ad - Sensor Type: Analog. Detection Area: 40mmx16mm. 62mmx20mmx8mm l*w*H Weight: About 3. 5g included:5x wingoneer® water level Sensor Humidity: 10% -90% non-condensing. Operating current: less than 20mA. Operating temperature:10?-30? Wingoneer® trademark Reg. No:4747611features:product name: water level sensor operating voltage: dc3-5v operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Production process: FR4 double-sided HASL Operating temperature:10?-30? Humidity: 10% -90% non-condensing Product Dimensions: approx.

More information about WINGONEER #ad

HiLetgo 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3

#ad
HiLetgo 3-01-0039-1 #ad - The dht11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required. Specification: Power supply voltage: 3. 3~5. 5v dc output: the single bus digital signal measuring range: 20-90%rh humidity, temperature 0~50° the measurement accuracy of +-5%RH: humidity, temperature +-2 ° Resolution: 1%RH humidity, temperature 1 ° Exchangeability: fully interchangeable Long term stability: < ± 1%RH Size: 28 * 12 * 7.

2mm interface Description: 1. Vcc:external 3. 3 v-5 v 2. Gnd:external Gnd 3. Do:small board switch digital output interface, connect the microcontroller IO port Package Included: 5* DHT11 Module 5* Dupont Cable Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

HiLetgo 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3 #ad - It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

The product has excellent quality, fast response, anti-interference ability, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications.

More information about HiLetgo 3-01-0039-1 #ad


Similar products:


Gikfun DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Sensor For Arduino Pack of 3pcs EK1083x3

#ad
Esooho LYSB00Q9YBIJI-ELECTRNCS #ad - No other components, unique single bus interface. Pack of 3pcs. Length:approx. 100 cm. Output lead:red vcc, yellowDATA, blackGND. 9 ~ 12 adjustable resolution Power supply range:3. 0v-5. 5v operating temperature range: -55°c - +125°c -67°f - +257°f storage temperature range: -55°c to - 125°C -67°F - +257°F Accuracy over the range of -10°C to +85°C: 0

5°c. No other components, unique single bus interface Output lead:red VCC, yellowDATA, blackGND Cable length:Approx.100 cm dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.

Gikfun DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Sensor For Arduino Pack of 3pcs EK1083x3 #ad - Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected. The product has excellent quality, anti-interference ability, fast response, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications.

And the simple communication protocol greatly reduces the programming effort required. Power supply range: 3. 0v to 5.

More information about Esooho LYSB00Q9YBIJI-ELECTRNCS #ad


Similar products:


Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.

Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected. The product has excellent quality, anti-interference ability, fast response, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - And the simple communication protocol greatly reduces the programming effort required. Power supply range: 3. 0v to 5. 5v. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. We have the manufacture factory, making productions and selling by ourselves.

So we can control the quality of our productions by ourselves for you.

More information about Elegoo EL-CP-004 #ad


Similar products:


Gowoops 2 PCS DHT22 Temperature Humidity Sensor Module Digital Measurement for Arduino Raspberry Pi 2 3

#ad
Gowoops #ad - Length:approx. 100 cm. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Each cable length: about 20 cm /8-inch. User manual: http://osoyoo. Com/?p=15718http://osoyoo. Com/?p=21402specification:type: dhT22 temperature and humidity sensorOperate Voltage: DC 3~5.

5vsignal output type: digitaltemperature range: -40 ℃ ~ 80 ℃Temperature Measurement Accuracy: ± 05 ℃humidity range: 0~100%rhhumidity measurement accuracy: ± 2%RH Dimensions:Size: 40 x 15 x 9 mm L / W / HScrew hole diameter: 2. 6mmweight: 6gpackage included:2 x dht22 sensor Module2 x Cable Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

Gowoops 2 PCS DHT22 Temperature Humidity Sensor Module Digital Measurement for Arduino Raspberry Pi 2 3 #ad - It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

The product has excellent quality, fast response, anti-interference ability, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications. And the simple communication protocol greatly reduces the programming effort required. Power supply range: 3.

More information about Gowoops #ad


Similar products:


Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino

#ad
ELEGOO EL-CB-001 #ad - New improvement: clearly printed on the female header connector, more precise and easier to use the wire. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. P>temperature range: -40 ℃ ~ 80 ℃, humidity Range: 0~100%RH. 100 percent compatible with the official version, for Arduino Uno R3.

Packing in a color box. We have always cared about the customer experience and improve the product function details. P>single-bus digital signal output, bidirectional serial data. So we can control the quality of our productions by ourselves for you. Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino #ad - It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

The product has excellent quality, anti-interference ability, fast response, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications. And the simple communication protocol greatly reduces the programming effort required. Power supply range: 3.

More information about ELEGOO EL-CB-001 #ad


Similar products:


ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino Projects RoHS Compliant

#ad
ELEGOO EL-CB-003 #ad - Faster transfer rates and more memory. So we can control the quality of our productions by ourselves for you. The chip is atmega2560-16au and Atmega16u2, same with the official version. Stronger reset circuit. P>temperature range: -40 ℃ ~ 80 ℃, humidity Range: 0~100%RH. 100 percent compatible with the official version, for Arduino Uno R3.

3v pin: 50 ma flash memory: 256 kb of which 8 kb used by bootloader sram: 8 kb eeprom: 4 kb clock speed: 16 mhz package includes: 1 x Mega 2560 ATmega2560-16AU Board Arduino-compatible 1 x USB cable Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino Projects RoHS Compliant #ad - It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

The product has excellent quality, fast response, anti-interference ability, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications. And the simple communication protocol greatly reduces the programming effort required. Power supply range: 3. 0v to 5.

More information about ELEGOO EL-CB-003 #ad


Similar products:


DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino

#ad
DIYmall 4331029690 #ad - Stronger reset circuit. 1mm dc barrel jack compatible with 5. P>temperature range: -40 ℃ ~ 80 ℃, humidity Range: 0~100%RH. Use potentiometer 105, output timing is from 05s to 200S. New improvement: clearly printed on the female header connector, more precise and easier to use the wire. Same product link https://www.

Amazon. Com/dp/b07csm3K63. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The mega is 100 percent compatible with Arduino and most shields designed for the Arduino Mega2560 R3. Use 5.

DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino #ad - Faster transfer rates and more memory. 5mm dc barrel jack. 100 percent compatible with the official version, for Arduino Uno R3. Package included: 5 x hc-SR501 PIR Infared Sensor. 5 * 2. P>operate voltage: dc 3~5. 5v. The uno now uses an atmega16u2 instead of the ATMega8U2 chip.

More information about DIYmall 4331029690 #ad


Similar products:


MakerFocus 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Serial Wireless Module Internet for Arduino IDE/Micropython with Free Adapter Board for ESP8266 ESP-01 and nRF24L01+

#ad
MakerFocus 4328612740 #ad - Use 5. New improvement: clearly printed on the female header connector, more precise and easier to use the wire. Use potentiometer 105, output timing is from 05s to 200S. P>single-bus digital signal output, bidirectional serial data. Go to file> examples> esp8266> blink, it will start blinking. Esp8266 is a highly integrated chip designed for the needs of a new connected world.

In arduino ide, look for the old fashioned Blink program. P>please choose the original seller: Gowoops, we don't guarantee the quality of the products bought from other seller. Note: on this retrigger jumper is a solder jumper, and you need solder it by yourself. The mega is 100 percent compatible with Arduino and most shields designed for the Arduino Mega2560 R3.

MakerFocus 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Serial Wireless Module Internet for Arduino IDE/Micropython with Free Adapter Board for ESP8266 ESP-01 and nRF24L01+ #ad - The chip model: cp2102; there is the way to guide you to use the new version: the command you needed to use is: esptool. Py --baud 115200 --port /dev/tty. Slab_usbtouart write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1. 7. Bin 0x1000 user1. Bin 0x37c000 esp_init_data_default.

More information about MakerFocus 4328612740 #ad


Similar products:


HiLetgo 2pcs DHT22/AM2302 Digital Temperature And Humidity Sensor Module Temperature Humidity Monitor Sensor Replace SHT11 SHT15 for Arduino Electronic Practice DIY

#ad
HiLetgo #ad - Output lead:red vcc, yellowDATA, blackGND. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. P>please choose the original seller: Gowoops, we don't guarantee the quality of the products bought from other seller. P>operate voltage: dc 3~5.

5v. Warranty: one year warranty, any question please feel free to contact. If you need more information about it, pls refer to: https://www. Amazon. Com/dp/b01n5ak6E1;. Its high degree of on-chip integration allows for minimal external circuitry, including front-end module, and the entire solution, is designed to occupy minimal PCB area;.

We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!

HiLetgo 2pcs DHT22/AM2302 Digital Temperature And Humidity Sensor Module Temperature Humidity Monitor Sensor Replace SHT11 SHT15 for Arduino Electronic Practice DIY #ad - Esp8266 is a highly integrated chip designed for the needs of a new connected world. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Stronger reset circuit. No pullup resistor needed.

More information about HiLetgo #ad


Similar products:


ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits

#ad
ELEGOO EL-CP-021 #ad - P>with fixing screw hole, convenient for install and fixed. 32 pieces double sided pcb prototype boards well packed in a plastic tray which is very easy to store and take out. P>single-bus digital signal output, bidirectional serial data. 5 * 2. Pack of 3pcs. The high quality of glass fiber material and the great durability of the board can always meet you requirements in various situation.

Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Product specification: - dimension: 4x6/ 3x7/ 5x7/ 2x8/ 7x9 CM - Quantity: 32 pieces in total of 5 different sizes - Thickness: about 1. 6mm - material: great quality of glass fiber FR4 - Color: Green basic, silver tone - Hole-pitch: 2.

54 mm/ 01 inches - hole-diameter: 1 mm/ 004 inches package list: - 6pcs 4x6cm double-sided pcb board with 280 holes - 10pcs 3x7cm double-sided pcb board with 240 holes - 7pcs 5x7cm double-sided PCB board with 432 holes - 7pcs 2 X 8CM double-sided PCB board with 168 holes - 2pcs 7 X 9CM double-sided PCB board with 806 holes Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits #ad - It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

The product has excellent quality, fast response, anti-interference ability, high cost and other advantages.

More information about ELEGOO EL-CP-021 #ad


Similar products: